Striker Vivid 5cv inc Railblaza Mounts

Overview

Mount your Garmin Striker Vivid 5cv cleanly on an inflatable boat with a Railblaza-based setup designed for quick fitting, easy removal and stable screen and transducer positioning on SIB tubes and transoms.

What this bundle is for

• Secure fishfinder placement – creates a stable viewing position on a side tube so your screen stays readable while you fish.
• Reliable transducer positioning – keeps the transducer mounted correctly for consistent sonar performance with minimal fuss.
• Quick swap setup – lets you remove and refit your fishfinder and accessories when transporting or changing boats.

Mounting setup explained

Tube mount for the fishfinder

• Railblaza QuickPort – a glue-on tube mount that provides a strong base for attaching the rotating platform on your SIB tube.
• Railblaza Rotating Platform – provides 360° rotation so you can angle the screen for the best viewing position from your seat.

Transom mount for the transducer

• Railblaza StarPort – mount on the transom to the right of the engine as viewed from the stern to help avoid prop wash affecting readings.
• Railblaza Transducer Arm – holds the transducer securely so you get dependable sonar readings when underway and when drifting.

Optional extras

• Victron 12V 8Amp battery – supports longer sessions with a dependable portable power option for your electronics.
• Two-part PVC glue – provides a stronger, longer-lasting bond for mounting ports to inflatable tubes compared with pad-only mounting.

Key features

• High-resolution 5-inch display – helps you clearly see fish and structure without needing a large console footprint.
• CHIRP sonar capability – improves target separation so fish are easier to pick out from clutter and bottom detail.
• Built-in GPS – mark spots, ramps and drifts so you can repeat productive lines on future sessions.
• Simple installation approach – combines tube and transom mounting so your screen and transducer sit where they perform best.

Recommended installation note

• Use two-part PVC glue where possible – it’s recommended over VHB pads alone to help ports stay secure on inflatable surfaces.

FAQs

Where should I mount the screen on an inflatable boat?

A side tube mount keeps the unit close, readable and out of the way, and the rotating platform helps you fine-tune the viewing angle from your seating position. We also recommend the Garmin Portable Fishing Kit to keep it protected and easier to setup

Where should I mount the Transducer Arm?

Always mount the Transducer Arm to the right of the engine as you look at it to avoid any wash from the prop.

Do I need glue or can I use the supplied pads?

Two-part PVC glue is recommended for a stronger long-term bond on inflatable surfaces, especially if you regularly launch, pack down and re-mount gear.

Will these mounts work for other fishfinders?

The Railblaza mounting approach is modular, and while this bundle is built around the Striker Vivid 5cv, the platform-and-port system can be adapted for other compatible accessories depending on your bracket and mounting needs.

What battery do I need to run the fishfinder?

A portable 12V battery option is offered on the page as an add-on, and it’s a practical choice for inflatable boat setups where you want a simple, removable power solution.

Shipping Cost

Shipping this item to mainland UK is:

Please see all our Shipping Fees here.

For overseas shipping fees please Contact Us.

Join our Facebook Group and follow other SIB fishing enthusiasts sharing tips, techniques, trips out and more.